INTERFACING
Fusible Fleece Extra Loft 45in x 15yds
# CD111F
(0)
From Callie Del® Interfacing
In Fleece
DESCRIPTION
This fusible fleece from Callie Del® will keep its loft after fusing and is perfect for those times when you need an extra layer of softness. Also good for when you need some extra body and stability in your home décor, craft, quilting, bag making, and apparel sewing projects.
• Use for home décor, crafts, bag making, and quilting and some garment sewing.
• Fleece is needled and has a fusible adhesive on one side.
• Sewing machine safe.
Use Instructions:
Note* It is always recommended to test the product on a scrap piece from your project before applying fleece to the entire piece so you can adjust pressing times and heat as needed.
1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed.
2. Cut interfacings according to pattern instructions.
3. Preheat your iron to a medium or wool setting with NO STEAM.
4. Place the fleece face down on your pressing station with the rough side – or glue side – facing up. Place your fabric with wrong side down on top of the glue side of the fleece.
5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded.
6. Pressing time may need to be adjusted for heavier weight fabrics.
7. After ironing, let the pieces cool before continuing with assembly process.
Style: Non-Woven
Type: One Sided Fusible Fleece
Content: 100% Polyester
Color: White
Weight: Midweight
Size: 45in x 15yds (114.3cm x 13.7m)
Made In: Mexico
Care: Machine wash warm on a delicate cycle and tumble dry low. Dry cleanable.
• Use for home décor, crafts, bag making, and quilting and some garment sewing.
• Fleece is needled and has a fusible adhesive on one side.
• Sewing machine safe.
Use Instructions:
Note* It is always recommended to test the product on a scrap piece from your project before applying fleece to the entire piece so you can adjust pressing times and heat as needed.
1. It is recommended to prewash your fabrics and garments without fabric softeners to achieve the best bond of interfacing to fabric. Interfacings do not need to be prewashed.
2. Cut interfacings according to pattern instructions.
3. Preheat your iron to a medium or wool setting with NO STEAM.
4. Place the fleece face down on your pressing station with the rough side – or glue side – facing up. Place your fabric with wrong side down on top of the glue side of the fleece.
5. Cover with a light, dry pressing cloth. Press and hold the iron in place with medium pressure 10-12 seconds. Repeat by lifting the iron and placing in the next area, slightly overlapping the first until the entire surface is bonded.
6. Pressing time may need to be adjusted for heavier weight fabrics.
7. After ironing, let the pieces cool before continuing with assembly process.
Not in Chains
|
$10.99 yd
You're shopping stores near
00000
Change my location.
STORES NEAR YOU
Locating Stores Close To You
Please Wait.
SUGGESTED ITEMS
Finding Suggested Products.
Please wait.
Please wait.
